Duck and goose hair removal machine for automatic use: 1 before use to check the ground and the power lines are not connected, confirm normal water tap water, and then marked with the power switch, check the machine roller rotation is normal 2 to be depilated Poultry in 65-68 degree hot water is good, put on the plate bulk hair removal machine (note poultry sideways on the flatbed), and swing the plate, which is fed to the machine shed. After about 10 seconds, three open faucet flush, the machine continues to rotate 10-30 seconds (depending on the actual hair removal to a given time), turn off the faucet, depress the foot pedal, has shed poultry fed with inertia on the number of the machine 4 Poultry glue hair in the process may have to shed the next batch of poultry has good hot water placed flat, after a number of hair removal machine clean sent immediately within the next batch into the machine, especially the operation of the cycle again. 5 When the shed is not very clean when should check the reason, whether hot water is not hot is good, (master water temperature and time), the time can be extended hair removal, until the best results. 6 When the hair removal is completed with water to wash hair removal machine (be careful not to wet with water when flushing the red box in the motor and power supply) for automatic duck and goose hair removal machine for areas: animal husbandry, aquaculture, pipeline Suitable for: Poultry Product Type: New Model: 1600 Power supply voltage: 380v Power: 3000W working capacity: 30kg / min Dimensions: 1600 * 1200 * 1000 mm Weight: 220Kg duck and goose hair removal machine for automatic is another chickens, ducks, geese hair removal work The main equipment for the horizontal transfer roller structure, using chain drive, two rows of the upper and lower rollers to achieve a relatively epilation transfer power, thus removing feathers and down two rows of hair removal roller spacing can be adjusted to suit the needs of different poultry.